LDG KT-100 Order #5184
Free Dipole Kit |
Amateur Antenna Tuners |
![]()
The LDG KT-100 Autotuner fills a need for Kenwood transceiver owners after the AT-300 antenna tuner was discontinued by Kenwood. The KT-100 is a flexible, low cost, easy to use unit just right for an AT-300 compatible Kenwood transceiver. Of course, most any LDG tuner will work just fine with a Kenwood transceiver, but wouldn't it be great if you could use the Tune button on the radio? So if you have a TS-2000, TS-50 or TS-480 or any Kenwood rig that is AT-300 compatible, the new LDG KT-100 serves as a dedicated tuner for Kenwood radios. Just press the Tune button on the radio. The LEDs on the front panel indicate tuning status, and will show a match in seconds, or even less of you’ve tuned on or near that frequency before; the KT-100 has 2,000 memories for instant recall of the tuning parameters for your favorite bands and frequencies. If you have an AT-300 compatible Kenwood radio, you can simply plug the KT-100 into your transceiver with the provided cable; the interface powers the tuner, and the Tune button on the radio begins a tuning cycle. The supplied interface cable makes the KT-100 a dedicated tuner for most modern Kenwood transceivers. There are no extra cables to buy, LDG includes the coax patch cable from the radio to the tuner so it's ready to go right out of the box. And like all LDG products, the KT-100 comes with a two-year, fully transferable warranty. |
|
Copyright 2008, Universal Radio, Inc. |